You choose where the vein runs.

Lay your island on the slab before anyone cuts it. Drag it.

Seam at 79 in
Hold a slab
Lot 2611 · Statuario · 3 cm · 128 x 80 in

How your island is cut

  1. Cut wet, on the saw and the waterjet.
  2. Every seam lands where you put it.
  3. What is left is yours. We make the offcut into a board.

The edge is where you touch it.

3 cm · Statuario
Edge profile

Same stone, three surfaces.

  • PolishedMirror shine and the deepest color. Shows etching on marble.
  • HonedSatin. Hides etching and fingerprints; reseal it and oil stays out.
  • LeatheredBrushed until the softer minerals sit lower. Hides almost everything.

In the yard this week. Each one is the only one.

Statuario · Lot 2611

Marble · 3 cm · 128 x 80 in · $118 / sq ft

Cool white, charcoal veins on a long diagonal.

This is the slab on the page now.

Hold a slab

Your kitchen, as a cut list.

Cut list and estimate for your kitchen in Lot 2611, Statuario
PieceSizeSq ftEdgeNotes
Island84 x 36 in21.00EasedBookmatched from Lots 2611-A and B, seam at 79 in. Undermount sink cutout.
Back run108 x 25.5 in19.13EasedCut from the pair's second slab.
Material and fabrication, 40.13 sq ft at $118$4,735
Sink cutout$250
Eased edgeIncluded
None
None
Estimate$4,790 to $5,180

Templating, sealing and install are included. Plumbing is not. Most kitchens we cut run 40-60 sq ft: about $3,900 to $8,800 across this week's lots.

From template to install in two weeks.

  1. Mon 1Template. We laser the cabinets, about an hour.
  2. Tue 2Layout. You approve every seam on a photo of your slab.
  3. Wed 3Cut.
  4. Thu 4Cut.
  5. Fri 5Edges ground.
  6. Mon 6Polished.
  7. Tue 7Checked against the template.
  8. Wed 8Sealed.
  9. Thu 9Loaded.
  10. Fri 10Installed, sink set. Cook on it tomorrow.

Questions

Quartz, quartzite or marble?

Quartz is engineered: crushed stone in resin, very even, but the resin scorches under a hot pan. Quartzite is natural, harder than granite, takes heat and rarely etches. Marble is softer: it etches where lemon or wine sits, and plenty of people love the patina.

Can I put a hot pan down?

On quartzite and granite, briefly, yes. On quartz, no: use a trivet. Marble will not burn, but a trivet is kinder to it.

Do I need to seal it?

Natural stone, yes. We seal at install. Once a year is plenty for most quartzite and granite, every six months for marble. If a drop of water beads, it is still sealed.

Where will the seams go?

Where you put them. We keep seams to 1/16 in with color-matched epoxy, and you approve every one on the layout before we cut.

How far can the island overhang?

Up to 10 in on 3 cm stone with no support. Past that we fit hidden steel brackets.

What do you need on template day?

Cabinets installed and level, the sink and faucet on site, the cooktop model number, and someone home for about an hour.

Why do you cut wet?

Cutting stone makes silica dust, which is dangerous to breathe. Every saw and grinder in our shop runs with water at the blade.

Come and walk the yard.

2410 East Buckeye Road
Phoenix, AZ 85034

Mon-Fri
7 to 5
Sat
8 to 12
Sun
Closed

(602) 555-0143

Bring your cabinet drawings. Closed-toe shoes: it is a working yard.

ABCDEF2611SawWaterjetShopLoadingOfficeParkingGateBuckeye Road
Lot 2611, Statuario, stands in row B. A Quartzite · B Marble · C Granite · D Quartz · E Soapstone · F Remnants.